Ultra flexible multi strand single core PVC insulated battery cable in red. 25mm² cable with an external diameter of 10.35mm to 10.65mm. These cables are far more flexible than standard battery cables, which makes fitting so much easier, routing them around components throughout the bodyshell.
The main characteristic that makes these cables much more desirable and this is why they are so widely used in aviation and military applications, is the reduction in voltage drop along the length of cable. Put simply, they loose less voltage along their length in comparison with normal battery cables.
This makes this type of cable even more suitable when you locate your battery in the boot or further away from your engine, starter, alternator and cut out switches, especially when trying to start high compression engines, if effect these cables help more of the power get to where it needs to be.
Please note these cables are not suitable for direct burial or outdoor installation in wet environments, as well as in contact with hot parts and it must not be subject to thermic radiation. Supplied in one length as requested.
- Insulation: flame retardant soft PVC, according to IEC 60332-1
- Conductor: flexible plain annealed copper wires
- Insulation Hardness: 70± 5 Shore 'A'
- Temperature rating: +5ºC/+70ºC (mobile use)
- Rating Voltage U/Uo: 450/750 V
- Flame ratardant: according to IEC332-1/CEI EN 50265